MARS Wireless Pen Tattoo Machine SMART-2

Description

FEATURES

Multi color screen, color changes following the voltage
Motor imported flat motor 8V11000 rpm
Stroke: 3.5mm
Battery pack connection method pin header, equipped with an RCA adapter
Operating voltage: 4-12V, recommended below 10∨
Strong start: 02 seconds 9V output
Charging time: 15 hours full charge with 2A charger
Use time: more than 10 hours, tattoos with different strokes and different elastic hardness
The needle will affect the battery life
Charging method: DC52AUSB charger, Type-C charging cable
Battery capacity: 1800mAh
Battery type: polymer lithium battery
Output short circuit protection, over current protection, over charge and over discharge protection

OPERATIONS:
POWER ON without Jumpstart: Press and hold the power button for 2 seconds.
POWER ON with Jumpstart: Double click the power button

– Click the +/ button to increase/decrease the voltage by 0,1V, long press the +/ button to increase/decrease the voltage by 10V
– A lightning mark appears on the battery grid when charging;
– Press and hold the power button for 2 seconds to manually shut down, and automatically shut down without output in 5 minutes;
– When the battery power is lower than 4%, it will automatically turn off the output, and automatically turn off after 5 minutes;
7After the battery is used up, you can remove the battery and install the RCA converter head to use the tattoo pen.